|
A wide turn down ratio
A control motor adjusts the discharge and suction speeds to meet a wide turndown ratio of 750:1.
|
C150 Capacity
0.2 - 150L/h |
|
C060 Capacity
0.08 - 60L/h |
 |
Energy savings and Eco-friendly
With the use of helical gears and spring assistance, power consumption is reduced by 70% compared to the standard spring back design.
 |
|
Precise chemical dosing operation
The valve design maintains precise dosing at any flow rate whilst the motor regulates discharge and suction speeds to achieve high accuracy (+/-1%) all with a cost effective design from a mechanically driven diaphragm pump.
Efficient pump head design is incorporated with high compression
Fast priming without air locks is achieved with a high compression ratio due to a fixed (maximum) stroke length.
Constant injection with low impact
Flow control via discharge speed adjustment (with a fixed suction speed) assures constant injection at any flow rate. This system also reduces impact (inertia force) and load to the discharge line.
Viscous liquid transfer
Standard IX series is capable of pumping liquid viscosities of up to 1000mP•a. Contact us for higher viscosity applications.
Compliant to world standards
One of the IX features is multi-voltage operation (100-240VAC) compatible worldwide. Compliant to UL, CE standards.
IP65
Drive and control units are sealed separately to an IP65 enclosure.
Safety design
Standard to all models is a diaphragm rupture detector, protecting users and the environment. Also, a detector for abnormal operation protects the pipework in case of an accidental high discharge pressure caused by clogging or improper operation. A drain hole also ensures safe operation even when the diaphragm is damaged.
 |
Specifications of pump (50/60Hz)
| Capacity |
0.08 - 150 L/hr |
| Max. discharge pressure |
1.0 MPa |
| Main materials |
PVDF, SUS316 |
| Liquid temp. range |
PVDF: 0 to 50 C deg. SUS316: 0 to 80 C deg. |
| Maximum viscosity |
1000 mPa·s |
Specification of controller
| Operation mode |
MAN (Manual) |
C060: 80 mL/h - 60 L/h, C150: 200 mL/h - 150 L/h |
| EXT |
Analogue control |
4 - 20, 0 - 20, 20 - 4, 20 - 0 mA |
| Pulse control |
C060: 0.00625 mL/PLS - 120 mL/PLS, C150: 0.01560 mL/PLS - 300 mL/PLS |
| Batch control |
C060: 6.25 mL/PLS - 120 L/PLS, C150: 15.6 mL/PLS - 300 L/PLS |
| Interval batch control |
Time 0-9 day, 0-23 H, 1-59 min |
| Capacity C060: 6.25 mL - 120 L, C150: 15.6 mL - 300 L |
| Input |
STOP / Pre-STOP / AUX / Interlock |
No-voltage contact or open collector |
| Profibus |
Communication protocol: Profibus-DP
International standard: Compliant to EN50170 (IEC61158) |
| Analogue |
0-20 mA DC (Internal resistance is 200 Ω .) |
| Pulse |
No-voltage contact or open collector (MAX pulse frequency is 100 Hz.) |
| Output |
Alarm 1 |
No-voltage contact (Mechanical relay) 250VAC 3A (Resistive load)
Selectable: STOP, Pre-stop, Interlock, Leak Detection and Motor Overload. |
| Alarm 2 |
No-voltage contact (PhotoMOS relay) AC250V 3A (Registive load)
Selectable: STOP, Pre-STOP, Interlock, Leak Detection and Motor Overload. |
| Power supply |
12VDC 30mA or below |
| Power voltage |
100-240VAC 50/60Hz | |